Home > Jicable��11 Programme of the Conference

Jicable��11 Programme of the Conference

Page 1
Page 1 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011
Jicable��11 Programme of the Conference
Chairmen and Rapporteurs of the sessions are subject to confirmation
SESSION A.0
Opening Session
Monday June 20th, 2011 - 9:00 - 10:30 Room A
A.0.1 The session will include the opening ceremony and official welcome addresses.
Opening Lecture: See the Jicable��s web site www.jicable.org/2011/
SESSION A.1
HV Installation techniques
Monday June 20th, 2011 - 11:00 - 12:30 Room A
Chairman : Pierre ARGAUT - Silec Cable (General Cable) / CIGRÉ () Rapporteur : Yves MAUGAIN - EDF / CIGRÉ (France) A.1.1
New technique to install power cables into ducts Willem GRIFFIOEN - Plumettaz SA, Rotterdam; The Netherlands Patrice BLANCHET - Plumettaz SA, Bex; Switzerland G��rard PLUMETTAZ - Plumettaz SA, Singapore; Singapore
A.1.2
Transition technologies for HV cable systems Volker AUE, Dietmar MEURER - Nexans Deutschland GmbH, Hannover; Germany
A.1.3
Oil filled cable leak location using PFT (Per-fluorocarbon tracing) - Non-intrusive oil filled cable leak location Mike FAIRHURST - National Grid, Warwick; United Kingdom Patrick KEELAN - PFT Tech, New York, NY; United States
A.1.4
First 220 kV city cable for retrofitting of steel pipe cables Anika BOSSE, Tobias WOLLSCHLÄGER, Volker WASCHK - nkt cables GmbH, Köln;
Germany A.1.5
New repair method of a 380 kV fluid-filled cable, damaged by impact Georg SVEJDA, Johannes VAVRA - Wienstrom, Vienna; Austria Manfred WANDA - Prysmian, Vienna; Austria Nick CRANE - Prysmian, Bishopstoke; United Kingdom
A.1.6
Improved installation methodologies for EHV cables in underground tunnels Per CHRISTENSEN, Jesper Lykke NIELSEN - nkt cables, Broendby; Denmark Alwyn HANEKOM, David CHEALE - Balfour Beatty Utility Solutions Ltd, Dartford; United
Kingdom
SESSION B.1
EMF: Electric and Magnetic Fields
Monday June 20th, 2011 - 11:00 - 12:30 Room B
Chairman : Paolo MAIOLI - Prysmian Cables and Systems (Italy) Rapporteur : Laetitia PASSOT - RTE (France) B.1.1
Impact of EMF on cable ratings and cable systems

Page 2
Page 2 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011
Harry ORTON - OCEI, Vancouver, BC; Canada Paolo MAIOLI - Prymian Cables and Systems, Milan; Italy Tim BARNES - Transgrid, Sydney; Australia Heinrich BRAKELMANN - University Duisburg-Essen, Duisburg; Germany Jarle BREMNES - Nexans Norway AS, Halden; Norway Sudhakar CHERUKUPALLI - BC Hydro, Vancouver, BC; Canada François COCHET - Nexans, Neuchatel; Switzerland Jean HOEFFELMAN - Elia-Engineering, Brussels; Belgium Fr��d��ric LESUR - RTE-France, Paris; France Julio LOPES - Inovatec Consultoria e Enginharia, Sao Paolo; Brazil Josu ORELLA - IBERDROLA, Bilbao; Spain Jacco SMIT - Liandon, Amsterdam; The Netherlands
B.1.2
EMF conductor management of cable systems Fr��d��ric LESUR - RTE, Paris; France
B.1.3
SC-IES-Cables: Single-core cables with integrated electromagnetic shielding Heinrich BRAKELMANN, Jan BRUEGGMANN - University Duisburg-Essen, Duisburg;
Germany
Volker WASCHK - nkt cables GmbH, Köln; Germany
B.1.4
Shielding of the electromagnetic field generated by HV underground cable lines Paolo MAIOLI - Prysmian Cables & Systems, Milan; Italy
B.1.5
Ampacity derating effects of magnetic field management techniques used with underground transmission cables John COOPER - Power Delivery Consultants, Tijeras, New Mexico; United States David FUGATE - Electric Research & Management, Pittsburgh, Pennsylvania; United
States
Tiebin ZHAO - Electric Power Research Institute, Charlotte, North Carolina; United States
B.1.6
Magnetic mitigation of HV cable junction zone Aldo CANOVA - Dipartimento Ingegneria Elettrica, Politecnica di Torino, Turin; Italy Luca GIACCONE - NoField srl - Incubatore di Imprese Politechnico di Torino, Turin; Italy
SESSION C.1
MV cable accessories
Monday June 20th, 2011 - 11:00 - 12:30 Room C
Chairman : Francis KRÄHENBÜHL - Nexans Deutschland Gmbh (Germany) Rapporteur : Bertrand JARRY - ERDF (France) C.1.1
15 year's experience of cold-shrinkable MV joints St��phane TOGNALI, G��rard LENCOT - Prysmian Câbles et Syst��mes France, Gron;
France C.1.2
MV cable termination failure prevention: Online diagnostic method application at ERDF Thierry ESPILIT, Fabrice ZORZI - EDF R&D, Moret-sur-Loing; France Roger TAMBRUN - ERDF Direction R��seau, Paris La D��fense; France
C.1.3
Connection to MV cable aluminium screen Christophe TOURCHER - EDF R&D, Moret-sur-Loing; France Members of SYCABEL - SYCABEL, Paris; France Roger TAMBRUN - ERDF, Paris La D��fense; France
C.1.4
Experience with joint failures in new "smart grid" MV cable circuits Jacco SMIT, Frank De VRIES - Liandon, Alkmaar; The Netherlands Ger SEBREGTS - Liander, Arnhem; The Netherlands

Page 3
Page 3 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011 C.1.5
Impact of filled-strand conductor on connector temperature for medium voltage joints Thomas PARKER, Nigel R. HAMPTON - NEETRAC, Atlanta, GA; United States
C.1.6
Service experience and laboratory testing of MV XLPE cable accessories Jan Tore BENJAMINSEN, Hallvard FAREMO, Sverre HVIDSTEN - SINTEF Energy
Research, Trondheim; Norway
SESSION D.1
Economy and costs of cable systems
Monday June 20th, 2011 - 11:00 - 12:30 Room D
Chairman : Mozart DE SIQUEIRA CAMPOS ARAÚJO - Brennand Energia – Recife (Brazil) Rapporteur : Giao ROINEL - RTE (France) D.1.1
Simulation of life cycle costing analysis to evaluate project of installation high voltage undersea cable 150 kV circuit III and IV Java-Bali Ngapuli SINISUKA - Bandung Institute of Technology (ITB), Bandung; Indonesia Iqbal FELANI, Novrizal ERDIANSYAH - Electricity Utility Company (PLN), Jakarta;
Indonesia D.1.2
Technical-economic analysis using aluminum instead of copper conductor for medium voltage cables and the practice in Zhejiang, China power grid XUAN YuLong, SHAO XueJian - Hangzhou Electric Power Bureau, Hangzhou City; China JIANG Wendong - Zhejiang Provincial Electric Power Bureau, Hangzhou City; China
D.1.3
Whole-life costs and environmental assessment of high voltage power cable systems Gary STEVENS, Ben PHILPOT, Janet THOMAS - GnoSys UK Ltd, Guildford; United
Kingdom
Ankit GOWADIA, Mike FAIRHURST - National Grid, Warwick; United Kingdom
D.1.4
Modern 3-core MV XLPE cables and their impact on TCO Håkan BRINGSELL, Lars EFRAIMSSON, Thomas CARLQVIST - Ericsson AB, Falun;
Sweden D.1.5
Economical design of cable conductors Fr��d��ric LESUR, Victor LEJOUR - RTE, Paris; France
D.1.6
Overall cost comparison between cable and overhead lines including the costs for repair of random failures Roberto BENATO - University of Padova, Padova; Italy Domenico NAPOLITANO - Free Lance, Venezia; Italy
SESSION A.2
HVDC cables and accessories
Monday June 20th, 2011 - 14:30 - 16:00 Room A
Chairman : Steve SWINGLER - University of Southampton (UK) Rapporteur : Paul PENSÉRINI - RTE - CNER (France) A.2.1
Specification for extruded HVDC land cable systems R��mi VATONNE, Nathalie BOUDINET, Jonathan BENETEAU, Pierre HONDAA, Fr��d��ric LESUR - RTE, Paris; France Gregorio DENCHE, Jos�� Manuel ARGUELLES ENJUANES - Red El��ctrica de España,
S.A., Madrid; Spain A.2.2
Key parameters for extruded DC cable qualification Wilfried FRELIN, Philippe EGROT - EDF R&D, Moret-sur-Loing; France

Page 4
Page 4 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011 A.2.3
Development of pre-molded accessories for HVDC extruded cable system SAKAI Yasuhiro, NIINOBE Hiroshi, HIRASAWA Takayuki - VISCAS Corporation, Ichihara,
Chiba; Japan A.2.4
Development of a 270 kV XLPE cable system for HVDC applications Mohamed MAMMERI, Marie Laure PAUPARDIN, Bernard POISSON - Silec Cable
(General Cable), Montereau; France A.2.5
Development of high performance polymeric materials for HVDC cables Andreas FARKAS, Carl-Olof OLSSON, Gustavo DOMINGUEZ - ABB AB, High Voltage
Cables, Karlskrona; Sweden
Villgot ENGLUND, Per-Ola HAGSTRAND, Ulf. H. NILSSON - Borealis AB, Stenungsund;
Sweden A.2.6
Evolution of electric field, space charge concentration and distributions in an extruded HVDC cable Carl-Olof OLSSON - ABB AB, Corporate Research, Västerås; Sweden Marc JEROENSE - ABB AB, High Voltage Cables, Karlskrona; Sweden
SESSION B.2
Environmental subjects - EMF and others
Monday June 20th, 2011 - 14:30 - 16:00 Room B
Chairman : Harry E. ORTON - Orton Consulting Ing (Canada) Rapporteur : François DESCHAMPS - RTE - CNER (France) B.2.1
Evaluation of the magnetic induction on metal pipelines by AC power cable circuits LIU Ying, MING LIU, CAO Xiaolong - Xi��an Jiaotong University, Xi��an, Shannxi; China HAN Xiaopeng, ZHAO Rui - Beijing Electric Power Design Institute, Beijing; China
B.2.2
Cable systems in multi-purposes or shared structures Jey JEYAPALAN - Cigre' WG-B1.08, Member from; United States Ray AWAD - Cigre' WG-B1.08, Member from; Canada Ken BARBER, Colin PEACOCK - Cigre' WG-B1.08, Member from; Australia Roberto BENATO - Cigre' WG-B1.08, Member from; Italy Ian BUTT - Cigre' WG-B1.08, Member from; United Kingdom Frank De WILD - Cigre' WG-B1.08, Member from; The Netherlands GOTO Takeshi, SAKUMA Susumu, TAKAHASHI Yoshihisa - Cigre' WG-B1.08, Member
from; Japan
KIM Jeong-tae - Cigre' WG-B1.08, Member from; Korea Jordi MONTEYS - Cigre' WG-B1.08, Member from; Spain Christophe MOREAU - Cigre' WG-B1.08, Member from; France Kjell OBERGER - Cigre' WG-B1.08, Member from; Sweden Rudolph WOSCHITZ - Cigre' WG-B1.08, Member from; Austria Kok Thean YOOM - Cigre' WG-B1.08, Member from; Singapore
B.2.3
275 kV XLPE cable bridge crossings - Design and construction issues John McCORMACK, Nicola MOFFA, Raju UPADHYAYA - ElectraNet, Adelaide, South
Australia; Australia
KIM Jeong hyun - Taihan Electric Co, Seoul; Korea HEO Hoi-deok - LS Cable Ltd, Gumi, Gyeongbuk; Korea Henry KENT - Energy Action, Sydney; Australia
B.2.4
Undergroud links across fields Alexandre IRLE, Jean ISOARD - RTE, Paris La D��fense; France
B.2.5
Development of new recyclable insulation material for power cable KIM Jinman, HAN Bongsoo, KIM Youngjun - ILJIN Electric, Hwasung-si, Kyunggi-do; Korea CHO Kyucheol, KU Kwanghoi, LEE Jaesun - SK Energy, Daejeon; Korea

Page 5
Page 5 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011
KIM Dongmyung, JOUNG Jongman, KWON Taeho - KEPCO Research Institute, Daejeon;
Korea B.2.6
New technology for recycling of plastics from cable waste Annika BOSS - Swerea IVF, Mölndal; Sweden Jan-Ove BOSTRÖM, Per-Håkan NILSSON - Ineos ChlorVinyls, Stenungsund; Sweden Andreas FARKAS - ABB AB, Karlskrona; Sweden Alf ERIKSSON - Nexans IKO Sweden AB, Grimsås; Sweden Erik RASMUSSEN - Stena Metall AB, Gothenburg; Sweden Elin SVENNINGSSON - Draka Kabel Sverige AB, Nässjö; Sweden Mattias DALESJÖ - Volvo 3P, Gothenburg; Sweden Alf JOHANSSON - Volvo Car Corporation, Gothenburg; Sweden
SESSION C.2
LV and MV Cable Systems reliability
Monday June 20th, 2011 - 14:30 - 16:00 Room C
Chairman : Jacint ROVIRA - Groupo General Cables Sistemas SA (Spain) Rapporteur : Alain DOULET - Former ERDF (France) C.2.1
Cable with optimized screen sheath complex Isabelle DENIZET, C��cile LELIEVRE, Bernard POISSON - Silec Cable (General Cable),
Montereau; France
Rajae BENAKKI - General Cable, Manlleu, Barcelona; Spain
C.2.2
The influence of manufacturing technique to power frequency breakdown characteristics of XLPE power cable YAN Mengkun, YANG Rongkai, MIAO Fugui - Quality Inspection and Test Center for
Equipment of Electric Power, Wuhan, Hubei province; China
YANG Liming - State Grid Electric Power Research Institute, Wuhan, Hubei province; China
C.2.3
Improving distribution system reliability Donald BAINBRIDGE - CitiPower & Powercor, Melbourne, Victoria; Australia
C.2.4
An enhanced TR-XLPE insulation for long life power cables Paul CARONIA, Saurav SENGUPTA, Timothy PERSON - The Dow Chemical Company,
Piscataway, NJ; United States
Steve CREE - Dow Europe GmbH, Horgen; Switzerland
C.2.5
Temperature factor impact on the cable service life of XLPE cable during the installation of cable accessories LI Zhongqun, ZHAO Sen, WANG Wei - State Grid Electric Power Research Institute,
Wuhan, Hubei province; China
LUO Jingsheng - Electric Power of Hangzhou, Hangzhou City; China
SESSION D.2
Maintenance (1)
Monday June 20th, 2011 - 14:30 - 16:00 Room D
Chairman : Seung-lk JEON - LS Cable (Korea) Rapporteur : Sylv��ric LAUMOND - Silec Cable (General Cable) (France) D.2.1
Monitoring facilities for outage reduction of 380 kV power cables Sander MEIJER - TenneT TSO bv, Arnhem; The Netherlands Johan J. SMIT - Delft University of Technology, Delft; The Netherlands Rogier JONGEN - Seitz Instruments AG, Niederrohrdorf; Switzerland Edward GULSKI - onsite.hv.solutions AG, Luzern; Switzerland
D.2.2
Development of the electric potential method for HPFF cable systems

Page 6
Page 6 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011
NISHIKAWA Tsuyoshi, AIHARA Yasuhiko, TSUCHIYA Shinichi - Tokyo Electric Power
Company, Chiyoda-ku, Tokyo; Japan D.2.3
Underground cables maintenance and repair Patrick DELCOURT, Joël BOUYER - RTE, Paris; France
D.2.4
Development of a simple method for condition assessment of oil filled XLPE terminations Knut Brede LILAND, Sverre HVIDSTEN - SINTEF Energy Research, Trondheim; Norway Geir BIRKENES, Frank MAUSETH - Department of Electric Power Engineering, NTNU,
Trondheim; Norway
Eilert BJERKAN - Nortroll AS, Levanger; Norway
D.2.5
REE's power cable maintenance program Rafael GARCÍA FERNÁNDEZ, Miguel Ángel PÉREZ LOUZAO - Red El��ctrica de España,
S.A., Madrid; Spain D.2.6
Materials and test methods for power cables exposed to heavy operating conditions Christian CORNELISSEN - Nexans Deutschland, Moenchengladbach; Germany
SESSION A.3
HV Service experience
Monday June 20th, 2011 - 16:30 - 18:15 Room A
Chairman : Kenneth Willis BARBER - Nexans Asia-Pacific (Australia) Rapporteur : Fabien CHARLES - Silec Cable (General Cable) (France) A.3.1
500 kV feed cable project for EXPO substation JIANG Yun - Shanghai Municiple Electrical Power Company, Shanghai; China JIANG Xiaojuan, WANG Zhigang - Power Grid Inspection & Maintenance Company,
SMEPC (Shanghai Municiple Electrical Power Company), Shanghai; China A.3.2
New 400 kV underground XLPE insulated cable system in UAE SHIMIZU Toshio, AOKI Toshiji, KURATA Tatsuo - J-Power Systems Corporation, Osaka;
Japan
SUKEGAWA Takuya, IGI Tsuyoshi - J-Power Systems Corporation, Hitachi, Ibaraki; Japan MASHIO Shoji - J-Power Systems Corporation, Tokyo; Japan
A.3.3
Technical solution to completion of the world first 500 kV XLPE underground cable system in Shanghai WONG Hai Ngiing, ABE Shunsuke, YAMAMOTO Shoji, TORAI Yasuo - VISCAS
Corporation, Tokyo; Japan
JIANG Yun, YANG Wen Wei, FANG Hao - Shanghai Municiple Electrical Power Company,
Shanghai; China A.3.4
Prequalification test of 500 kV XLPE cable system in China XIA Rong, YANG Liming - State Grid Electric Power Research Institute, Wuhan, Hubei
province; China
YANG Rongkai - Quality Inspection and Test Center for Equipment of Electric Power,
Wuhan, Hubei province; China
JIN Guangqi, LV Gengming - Shenyang Furukawa Cable Corp., LTD., Shenyang, Liaoning;
China
TAKAO Nakano - VISCAS Corporation, Tokyo; Japan
A.3.5
Experience with developing and installing of a three core 150 kV power cable Jacco SMIT, Arie STEENIS, Alex GESCHIERE - Liandon, Alkmaar; The Netherlands Volker WASCHK, Jens WOLCKEN, Hendrik REITER - nkt cables GmbH, Köln; Germany
A.3.6
Development, qualification and experiences with 500 kV XLPE cable systems Johannes KAUMANNS, Andreas WEINLEIN, Gero SCHROEDER, Volker STROOT -

Page 7
Page 7 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011 Suedkabel GmbH, Mannheim; Germany A.3.7
Return of experience of 380 kV power cable failures Sander MEIJER - TenneT TSO bv, Arnhem; The Netherlands Johan J. SMIT, Xiaolin CHEN - Delft University of Technology, Delft; The Netherlands Wilfried FISCHER - 50Hertz Transmission GmbH, Berlin; Germany Luigi COLLA - Terna S.p.A., Rome; Italy
SESSION A.3.bis
Presentation of Posters Session E.7.2
Monday June 20th, 2011 - 18:15 - 18:30 Room A
Chairman : Kieron LEEBURN - CBI-electric: African Cables Ltd (South Africa) Rapporteur : Raymond PETRUS - Silec Cable (General Cable) (France) A.3.bis.1 Presentation of the session by the chairman.
SESSION B.3
Challenges - Fire
Monday June 20th, 2011 - 16:30 - 18:15 Room B
Chairman : Jean BECKER - Nexans / SART Consult (Belgium) Rapporteur : Jean-Louis PONS - Prysmian Câbles et Syst��mes (France) B.3.1
Fire performance of HV and EHV XLPE insulated cables James ROBINSON, Wendy LOYENS - Borealis Polymers NV, Beringen; Belgium Graeme ALEXANDER - Olex Cables, Victoria; Australia
B.3.2
The role of the EU Construction Products Directive in supporting the application of improved low fire-hazard cables Jan SCHUTTEN - Europacable, Brussels; Belgium
B.3.3
IEEE, API and IEC Standards update for testing, selection and installation of fire-rated circuit integrity cables Arturo MALDONADO - A&M Technology Group LLC, Naples, Florida; United States
B.3.4
Study on the reaction to fire of medium voltage cables systems Neus GENERÓ, Jacint ROVIRA, Juan de Dios MARTÍNEZ - Grupo General Cable
Sistemas S.A., Manlleu, Barcelona; Spain
Saturnino MARTÍN, Gonzalo MAÍZ - IBERDROLA, Bilbao; Spain Gregorio DENCHE - Red El��ctrica de España, S.A., Madrid; Spain
B.3.5
Fire performance cables under current overload conditions Ivan IVANOV, Graeme ALEXANDER - Olex, a Nexans company, Melbourne, Victoria;
Australia
Richard HOSIER, Ken BARBER - Nexans Asia Pacific, Singapore; Singapore
B.3.6
Fire equipment system in underground tunnels of KEPCO PAIK Nam-yeol, KIM Hong-lae - KEPCO, Seoul; Korea
B.3.7
Assessment of the reaction to fire performance of electric cables under the EU construction products directive Terence JOURNEAUX - Prysmian Cables & Systems Limited, Eastleigh; United Kingdom
SESSION B.3.bis
Presentation of Posters Session E.7.1
Monday June 20th, 2011 - 18:15 - 18:30 Room B
Chairman : John R. DENSLEY - ArborLec Solutions Inc. (Canada)

Page 8
Page 8 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011 Rapporteur : J��rôme MATALLANA - Nexans (France) B.3.bis.1 Presentation of the session by the chairman.
SESSION C.3
Testing methods - Water Trees and Partial Discharges
Monday June 20th, 2011 - 16:30 - 18:15 Room C
Chairman : Annika SMEDBERG - Borealis AB (Sweden) Rapporteur : Bernard POISSON - Silec Cable (General Cable) (France) C.3.1
Non-destructive water-tree detection in XLPE cables Willem BOONE - KEMA Nederland BV, Arnhem; The Netherlands John DENSLEY - Arborlec Solutions, Mississauga; Canada Sverre HVIDSTEN - SINTEF Energy Research, Trondheim; Norway
C.3.2
Tree-retardant crosslinked (TRXLPE) reduced insulation wall accelerated cable life test (ACLT) results John T. SMITH III - General Cable Corporation, Scottsville, TX; United States
C.3.3
3 kHz accelerated growth of water trees in medium voltage extruded cables Blandine HENNUY, Quentin DE CLERCK - Laborelec, Linkebeek; Belgium Alain FRANÇOIS, Daniel TENRET - Ores, Louvain-La-Neuve; Belgium Pieter LEEMANS, Joachim MARGINET - Eandis, Melle; Belgium
C.3.4
A new approach to avoid negative superposition errors for PD measurements on lengths of extruded power cable Kay RETHMEIER, Alexander KRAETGE, Michael KRÜGER - Omicron, Klaus, Vorarlberg;
Austria C.3.5
A new method of adopting distributed PD measurement in series resonance frequency voltage resistance test of high voltage cable ZHOU Lijun, JIANG Xiaojuan - Power Grid Inspection & Maintenance Company, SMEPC
(Shanghai Municiple Electrical Power Company), Shanghai; China C.3.6
Measuring partial discharges with enhanced noise reduction by use of multi-band PD bandpass filters Kay RETHMEIER, Alexander KRAETGE, Michael KRÜGER - Omicron, Klaus, Vorarlberg;
Austria
SESSION C.3.bis
Presentation of Posters Session E.5.1
Monday June 20th, 2011 - 18:15 - 18:30 Room C
Chairman : François COCHET - Nexans (Switzerland) Rapporteur : Serge COLOMBIER - Prysmian Câbles et Syst��mes (France) C.3.bis.1 Presentation of the session by the chairman.
SESSION D.3
Maintenance (2)
Monday June 20th, 2011 - 16:30 - 18:15 Room D
Chairman : Xiaolong CAO - Univ. of Xian Jiaotong (China) Rapporteur : Christian RÉMY - Prysmian Câbles et Syst��mes (France) D.3.1
Application of artificial intelligence to the problem of selecting the appropriate diagnostic for cable systems Yamille DEL VALLE, Nigel HAMPTON - NEETRAC, Atlanta, GA; United States

Page 9
Page 9 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011 D.3.2
Implementation of low and medium voltage cable aging management at nuclear power plants Gary TOMAN - Electric Power Research Institute, Charlotte, NC; United States
D.3.3
New technique for fault location in underground medium voltage cable Lionel REYNAUD, Daniel PINEAU - Institut de recherche d'Hydro-Qu��bec (IREQ),
Varennes, Qu��bec; Canada
Jacques CÔTÉ - Hydro-Qu��bec Distribution, Montr��al, Qu��bec; Canada
D.3.4
Implementation of modern methods of on-site testing and diagnosis of HV power cables Edward GULSKI - onsite.hv.solutions AG, Lucerna; Switzerland Aleksandra RAKOWSKA, Krzysztof SIODLA - Poznan University of Technology, Poznan;
Poland
Piotr CICHECKI - onsite.hv.solutions Benelux B.V., Delft; The Netherlands Laurens D. POTS - BV Twentsche Kabelfabriek, Haaksbergen; The Netherlands Johan J. SMIT - Delft University of Technology, Delft; The Netherlands
D.3.5
Hydro-Qu��bec experience with infrared imaging for the maintenance of the underground medium voltage cable system Jacques CÔTÉ, Andr�� BELLEMARE - Hydro-Qu��bec, Montr��al, Qu��bec; Canada
D.3.6
Investigation into the downtown Vancouver outage of 14 july 2008 Khaled ABDOLALL, John VANDERMAAR - Powertech Labs Inc., Surre, BC; Canada Dexter TARAMPI - BC Hydro, Vancouver, BC; Canada
D.3.7
Condition based maintenance of LV cable network of public lighting Zolt��n Ád��m TAMUS, Norbert FEKETE - Budapest University of Technology and
Economics, Budapest; Hungary
Tam��s SCHACHINGER, R��bert EGYED - GA Hungary Ltd., Törökbalint; Hungary
SESSION D.3.bis
Presentation of Posters Session E.5.2
Monday June 20th, 2011 - 18:15 - 18:30 Room D
Chairman : Robert DONAGHY - ESB International (Ireland) Rapporteur : Isabelle DENIZET - Silec Cable (General Cable) (France) D.3.bis.1 Presentation of the session by the chairman.
SESSION A.4
HV System design - EMF (Electric and Magnetic Fields)
Tuesday June 21st, 2011 - 9:00 - 10:30 Room A
Chairman : Alain GILLE - Elia Engineering (Belgium) Rapporteur : Pierre MIREBEAU - Nexans France (France) A.4.1
Retrofitting of pipe-type cables Pierre HONDAA, Martial GUILLEMIN, Fr��d��ric LESUR - RTE, Paris; France
A.4.2
HVAC cables with ferromagnetic sheathings Jacco SMIT - Liandon, Alkmaar; The Netherlands Heiner BRAKELMANN, Jorg STAMMEN, Jan BRUEGGMANN - University
Duisburg-Essen, Duisburg; Germany
Volker WASCHK - nkt cables GmbH, Köln; Germany
A.4.3
Towards smart grid approach: Data acquisition from on-line monitoring of high voltage XLPE/oil-filled transition joints Luigi TESTA - Techimp, Bologna; Italy

Page 10
Page 10 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011
Andrea CAVALLINI, Gian Carlo MONTANARI - University of Bologna, Bologna; Italy Arie MAKOVOZ - ConEdison, New York, NY; United States
A.4.4
The impact of transmission cable system construction and design on commissioning test options and results Steven CAMPBELL - General Cable / Silec Cable, Carrollton, Georgia; United States Benjamin LANZ - IMCORP, Manchester, Connecticut; United States
A.4.5
Feasibility study and cable system optimization in application of 500 kV XLPE cable in Edmonton region of Alberta Ali DARIANI - SNC LAVALIN T&D, Calgary Alberta; Canada
A.4.6
Recent experiences with AC High voltage test equipment and PD commissioning testing of XLPE cable systems rated 69 kV and above Mark FENGER - Kinectrics Inc., Toronto, Ontario; Canada
SESSION B.4
Challenges - General
Tuesday June 21st, 2011 - 9:00 - 10:30 Room B
Chairman : Marcello DEL BRENNA - Prysmian Powerlink Srl (Italy) Rapporteur : R��mi VATONNE - RTE (France) B.4.1
HVDC XLPE cable systems applicable for higher temperature and polarity reversal operation MURATA Yoshinao, ABE Kazutoshi, MATSUNAGA Osamu, ASAI Shinya, KATAKAI Shoshi - J-Power Systems Corporation, Hitachi, Ibaraki; Japan MASHIO Shoji, SUIZU Makoto - J-Power Systems Corporation, Minato-ku, Tokyo; Japan
B.4.2
Electric field measurements on XLPE/EPDM 2-layer insulation systems under DC stress J��rôme MATALLANA, Ludovic BOYER, Jean-François BRAME, Pierre MIREBEAU -
Nexans France, Calais; France
J��rôme CASTELLON, Petru NOTINGHER, Serge AGNEL, Alain TOUREILLE - Institut
d��Electronique du Sud - Universit�� Montpellier 2, Montpellier; France B.4.3
Dielectric characterization of non-linear materials subjected to high DC and transient stresses Ludovic BOYER, J��rôme MATALLANA, Xavier MEERSSEMAN - Nexans France, Calais;
France
Björn SONERUD - Nexans Norway AS, Halden; Norway Arnaud ALLAIS - Nexans Research Centre, Lyon; France J��rôme CASTELLON, Petru NOTINGHER - Institut d��Electronique du Sud - Universit��
Montpellier 2, Montpellier; France B.4.4
Further developed fully insulated high voltage aerial cables Lars EFRAIMSSON, Bengt STRÖM, Thomas CARLQVIST - Ericsson AB, Falun; Sweden
B.4.5
Introduction of mitigation technique to control magnetic field radiated by underground cables Kamal BEN HAMMADI, Fabien CHARLES, Bernard DHUICQ - Silec Cable (General
Cable), Montereau; France
SESSION C.4
Testing methods - General
Tuesday June 21st, 2011 - 9:00 - 10:30 Room C
Chairman : Nigel HAMPTON - Georgia Tech NEETRAC (USA) Rapporteur : Emmanuel DIC - Silec Cable (General Cable) (France)

Page 11
Page 11 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011 C.4.1
On-site testing with compact AC test-system at the first 500 kV XLPE cable project in South America Andreas WEINLEIN, Gero SCHROEDER - Suedkabel GmbH, Mannheim; Germany Harald GEYER - agea-kull ag, Derendingen; Switzerland
C.4.2
A methodology for the assessment of HVDC-XLPE cable insulation Bertrand VISSOUVANADIN, Gilbert TEYSSEDRE, S��verine LE ROY, Christian LAURENT
- Laboratoire LAPLACE, Toulouse; France
Isabelle DENIZET, Mohamed MAMMERI, Bernard POISSON - Silec Cable (General
Cable), Montereau; France C.4.3
Online-monitoring of the conductor temperature in MV power cable production using ultrasonic diagnosis Gregor BRAMMER, Armin SCHNETTLER - Institute for high voltage technologies, Aachen;
Germany C.4.4
Modern methods of installation and diagnostic testing of distribution power cables Edward GULSKI - onsite.hv.solutions AG, Luzern; Switzerland Frank De VRIES - Liandon, Alkmaar; The Netherlands Piotr CICHECKI - onsite.hv.solutions Benelux B.V., Werkendam; The Netherlands Johan J. SMIT - Delft University of Technology, Delft; The Netherlands
C.4.5
Challenges associated with the interpretation of dielectric loss data from power cable system measurements Joshua PERKEL, Nigel HAMPTON - NEETRAC, Atlanta, GA; United States Jean Carlos HERNANDEZ - Universidad de Los Andes, M��rida, M��rida; Venezuela Jean-François DRAPEAU - Institut de recherche d'Hydro-Qu��bec (IREQ), Montr��al,
Qu��bec; Canada
John DENSLEY - Arborlec Solutions, Toronto, Ontario; Canada
C.4.6
Next generation 200 kV VLF field testing and diagnosing of high voltage power cables Mohammad Eyad AL-SIBAI - High Voltage Inc., Copake, New York; United States
SESSION D.4
Submarine - Cable performance
Tuesday June 21st, 2011 - 9:00 - 10:30 Room D
Chairman : Marco MARELLI - Prysmian (Italy) Rapporteur : Vincent VENTURINI - RTE (France) D.4.1
Collective versus individual screening of "wet design" (Um <= 36 kV) power cores for multi-core cables Jarle J BREMNES - Nexans Norway AS, Halden; Norway Hallvard FAREMO - SINTEF Energy Research, Trondheim; Norway
D.4.2
Analysis of transmission capacity of Zhoushan-mainland 110 kV submarine cables WU Mingxiang - Zhejiang Provincial Electric Power Test and Research Institute, Hangzhou
City; China D.4.3
The Hawon-Anjwa project: Development and installation of the AC 154 kV XLPE 3 cores fiber optic embedded submarine power cable system KIM Nam-yu, KIM Sung-yun, JEON Seung-ik, KWUN Young-guk, LEE Kwang-yeol - LS
Cable Ltd, Gumi, Gyeongbuk; Korea D.4.4
Water drop discharges and surface flashover at the solid - solid interface Seyed Majid HASHEMINEZHAD, Erling ILDSTAD - Department of Electric Power
Engineering, Norwegian Univ. of Technology and Science, Trondheim; Norway D.4.5
The Oslo fjord project - The first project with long length 420 kV XLPE insulated

Page 12
Page 12 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011
submarine cables Tor SKEIE, Jostein ELDERS, Alf Erik RØD - Nexans Norway AS, Halden; Norway Bjørn SANDEN, Jørgen THON - Statnett, Oslo; Norway
D.4.6
Qualification of a long 345 kV submarine XLPE cable system Johan KARLSTRAND, Danijela PALMGREN, Jörn ANTONISCHKI, Jonas JOHANSSON, Björn ZETTERVALL - ABB, Karlskrona; Sweden
SESSION A.5
HV Accessories
Tuesday June 21st, 2011 - 11:00 - 12:30 Room A
Chairman : Aleksandra RAKOWSKA - Tu Poznan University of Technology (Poland) Rapporteur : François GAHUNGU - Nexans (France) A.5.1
Cable accessories workmanship - US perspective Milan UZELAC, Steve WARTON - G&W Electric Company, Blue Island, IL; United States Frank FRENTZAS - Exelon-Commonwealth Edison, Chicago, IL; United States
A.5.2
Development of dry outdoor termination with silicone gel for self-standing MORI Anna, MARUICHI Shinji, NIINOBE Hiroshi, SUETSUGU Masahiro - VISCAS
Corporation, Ichihara, Chiba; Japan A.5.3
Dry terminations for high voltage cable systems Pascal STREIT - Nexans Switzerland, Penthalaz; Switzerland
A.5.4
Remedial action and further quality assuring measures after a failure in a 400 kV GIS cable termination Frank JAKOB, Frank KOWALOWSKI, Claus KUHN, Wilfried FISCHER - 50Hertz
Transmission GmbH, Berlin; Germany
Sigurdur A. HANSEN - Suedkabel GmbH, Mannheim; Germany
A.5.5
Long time operational experience with 400 kV XLPE power cable systems in Berlin Claus Georg HENNINGSEN, Wilfried FISCHER - 50Hertz Transmission GmbH, Berlin;
Germany A.5.6
Red Electrica's operating experience on 400 kV submarine and underground interconnection between Spain and Morocco Rafael GARCÍA FERNÁNDEZ, Miguel Ángel PÉREZ LOUZAO, Maria Dolores LÓPEZ-MENCHERO CÓRDOBA - Red El��ctrica de España, S.A., Alcobendas; Spain
SESSION B.5
Long links & Gas Insulated Line (GIL)
Tuesday June 21st, 2011 - 11:00 - 12:30 Room B
Chairman : Ray AWAD - Hydro-Qu��bec TransÉnergie (Canada) Rapporteur : Éric DORISON - EDF R&D (France) B.5.1
Feasibility study for an 88 km underground cable system to supply 135 MVA to a desalination plant Mark STEMMLE - Nexans Deutschland GmbH, Hannover; Germany Ken BARBER - Nexans Asia-Pacific, Singapore; Singapore
B.5.2
Electrical studies performed to insert long AC cables in the French grid - First conclusions S��bastien DENNETIERE, Jonathan DUFOUR, Alexandre PARISOT, Jean-Pierre TAISNE, Yannick VERNAY - RTE, Paris la D��fense; France
B.5.3
Contribution to localization of a fault on a long extruded submarine cable by LV Time

Page 13
Page 13 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011
Domain Reflectrometry Alain HERBRETEAU - OTC, Avignon; France Bernard DHUICQ - Silec Cable (General Cable), Montereau; France
B.5.4
Challenges during planning, development and performance at a 275 kV XLPE cable project in the city of Liverpool Sebastian EBERT, Horst MEMMER, Johannes KAUMANNS, Andreas WEINLEIN, Gero SCHROEDER - Suedkabel GmbH, Mannheim; Germany
B.5.5
GIL for power transmission in specific site conditions Alberto BERTINATO, Alain GIRODET - Alstom GRID, Villeurbanne; France Mathieu BERNARD, Jean-Luc RAYON, Arnaud FICHEUX - Alstom GRID, Aix-Les-Bains;
France B.5.6
Pilot installation of a 380 kV directly buried gas insulated line (GIL) Claus NEUMANN - Siemens AG, Erlangen; Germany Stephan POEHLER - Amprion GmbH, Dortmund; Germany
SESSION C.5
Cables for the future - Nano dielectrics
Tuesday June 21st, 2011 - 11:00 - 12:30 Room C
Chairman : Michel FRÉCHETTE - Institut de recherche d'Hydro-Qu��bec (Canada) Rapporteur : J��rôme CASTELLON - Universit�� de Montpellier (France) C.5.1
Progress in the field of nanodielectrics : potentiality for HV cable applications Michel F. FRÉCHETTE - Institut de recherche d'Hydro-Qu��bec (IREQ), Varennes, Qu��bec;
Canada
Arnaud ALLAIS, Lazhar KEBBABI - Nexans; J��rôme CASTELLON - IES; France Hugues COUDERC, Christele VANGA - ÉTS/IREQ; Canada
C.5.2
Effect of conductive inorganic filler on space charge characteristics in XLPE as a HVDC insulating material MIZUNO Takehiko, TAKAHASHI Tohru - VISCAS Corporation, Ichihara, Chiba; Japan HARADA Hiroshi, HAYASHI Nobuya, TANAKA Yasuhiro - Tokyo City University,
Setagaya-ku, Tokyo; Japan
MAENO Takeshi - National Institute of Information and Communication Technolory,
Koganei, Tokyo; Japan C.5.3
Dielectric properties analysis of HDPE/SiO2 nanodielectric materials for future cable insulation J��rôme CASTELLON, Laurent BANET, Ioana PREDA, Serge AGNEL, Alain TOUREILLE -
Institut d'Électronique du Sud - Universit�� Montpellier 2, Montpellier; France
Éric DAVID, Abdelkhalek SAMI - École de Technologie Sup��rieure - Universit�� du Qu��bec,
Qu��bec, QC; Canada
Michel F. FRÉCHETTE - Institut de recherche d'Hydro-Qu��bec (IREQ), Qu��bec, QC;
Canada C.5.4
Voltage stabilizing additive assessment in polyethylene insulation Timothy PERSON, Bret NEESE - The Dow Chemical Company, Piscataway, NJ; United
States C.5.5
Dielectric response of polyethylene loaded with nano particules of Si02 Éric DAVID, Abdelkhalek SAMI - École de Technologie Sup��rieure - Universit�� du Qu��bec,
Qu��bec, QC; Canada
Michel F. FRÉCHETTE - Hydro-Qu��bec's Research Institute, Qu��bec, QC; Canada
C.5.6
PEA assessment of XLPE and semiconductive compounds for HVDC application:

Page 14
Page 14 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011
Measurements on plaques and mini-cables Barry LENNON, Peter MORSHUIS - Delft University of Technology, Delft; The Netherlands Timothy PERSON - The Dow Chemical Company, Piscataway, NJ; United States Simon SUTTON - Dow Chemical Company Ltd, Staines; United Kingdom
SESSION E.5.1
Ageing, Maintenance, remaining life estimation and management (1)
Tuesday June 21st, 2011 - 11:00 - 12:30 Room E: Poster Session
Chairman : François COCHET - Nexans (Switzerland) Rapporteur : Serge COLOMBIER - Prysmian Câbles et Syst��mes (France) E.5.1.1 Effects of cross-linking method on insulation properties of cross-linked
polyethylene ZHU Xiao-hui, ZHOU Feng-zheng - Tianjin Electrical Power Research Institute, Tianjin;
China
DU Bo-xue, GAO Yu - School of Electrical Engineering and Automation, Tianjin University,
Tianjin; China E.5.1.2 The effect of the peroxide ratio on crosslinking of cable materials
Amin SHABANI, Emmanuel RICHAUD, Xavier COLIN - Arts et M��tiers ParisTech, Paris;
France
Gregory MARQUE, Carole MONCHY-LEROY - EDF R&D, Moret-sur-Loing; France
E.5.1.3 Study of the stabilization of polyethylene and ethylene-propylene copolymers by a
phenolic antioxydant Wissam BANNOUF, Emmanuel RICHAUD, Xavier COLIN - Arts et M��tiers ParisTech,
Paris; France
Gr��gory MARQUE, Carole MONCHY-LEROY - EDF R&D, Moret-sur-Loing; France
E.5.1.4 Electric properties of XLPE model cables under AC and DC field at various
temperatures Le WANG, Davide FABIANI, Gian Carlo MONTANARI, Fabrizio PALMIERI - University of
Bologna, Bologna; Italy
Ulf. H. NILSSON - Borealis AB, Stenungsund; Sweden
E.5.1.5 A new method for monitoring the antioxidant content in cable compounds during
e-beam crosslinking Matthias MEYER, Inge DUEMMLER - Nexans Research Center, Nuremberg; Germany
E.5.1.6 Development of a diagnosis technique for assessing the properties of nuclear aged
cables Domitille PITARD, Carole MONCHY-LEROY - EDF R&D, Moret-sur-Loing; France Patrice THÉROND - EDF SEPTEN, Villeurbanne; France
E.5.1.7 Rapid qualification of power cables materials
Henryk HERMAN, Gary STEVENS, Janet THOMAS - GnoSys UK Ltd, Guildford; United
Kingdom E.5.1.8 The effect of water ingress on dielectric properties of polyethylene cable insulation
Simon BERNIER, Jean-François DRAPEAU - Institut de recherche d'Hydro-Qu��bec
(IREQ), Varennes, Qu��bec; Canada
Éric DAVID - École de Technologie Sup��rieure - Universit�� du Qu��bec, Montr��al, Qu��bec;
Canada E.5.1.9 Analysis of the resistivity loss of aged PVC cables and effects on their dielectric
strength Pierre QUENNEHEN, Fabrice ZORZI, Thierry ESPILIT - EDF R&D, Moret-sur-Loing;
France

Page 15
Page 15 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011
Patrice THÉROND - EDF SEPTEN, Villeurbanne; France Isabelle ROYAUD, G��rard SEYTRE - IMP/LMPB Universit�� Lyon 1, Villeurbanne; France Pascal RAIN - G2ELab, Grenoble; France
E.5.1.10Evaluation of field rejuvenated medium-voltage extruded cables
Serge PÉLISSOU, Saleman ALIBHAY - Institut de recherche d'Hydro-Qu��bec (IREQ),
Varennes, Qu��bec; Canada E.5.1.11Study on the maintenance policy based on RCM for power cable lines
ZHAO Jiangkang, LUO Junhua - State Grid Electric Power Research Institute of China,
Wuhan, Hubei province; China
ZHANG Li - Power Grid Inspection & Maintenance Company, SMEPC (Shanghai Municiple
Electrical Power Company), Shanghai; China
LI Honglei - East China Electric Power Test & Research Institute Co., Ltd., Shanghai; China
E.5.1.12Underground cable description data management
Patrick DELCOURT, Joël BOUYER - RTE, Paris; France
E.5.1.13Replacement strategies for customer minutes lost reduction in medium voltage
cable networks Peter BUYS, Dik Van HOUWELINGEN, Edward COSTER - Stedin BV, Rotterdam; The
Netherlands E.5.1.14Evaluation of insulating systems quality for HVDC power cable design toward space
charge criterion J��rôme CASTELLON, Serge AGNEL, Alain TOUREILLE - Institut d'Électronique du Sud -
Universit�� Montpellier 2, Montpellier; France
Arnaud ALLAIS, Lorrene BAYON - Nexans Research Center, Lyon; France
E.5.1.15On-line diagnostic system for SVL device on under-ground power cables
MYUNG Keun-Sik, YOON Huyng-hee, KIM Heung joo - KEPCO, Seoul; Korea JEONG Jae ki, JEONG Yun-kee, CHOI Yun-Jong - HanbitEDS Co. Ltd, DaeJeon; Korea
SESSION E.5.2
Ageing, Maintenance, remaining life estimation and management (2)
Tuesday June 21st, 2011 - 11:00 - 12:30 Room E: Poster Session
Chairman : Robert DONAGHY - ESB International (Ireland) Rapporteur : Isabelle DENIZET - Silec Cable (General Cable) (France) E.5.2.1 Partial discharge (PD) automatic diagnosis tool for workers' safety in underground
vaults François LÉONARD, Lionel REYNAUD, Jacques BHERER, Daniel PINEAU, Didier MUSSARD, Sylvain POIRIER - Hydro-Qu��bec, Qu��bec, QC; Canada
E.5.2.2 Temperature dependency of tan delta measurements at 0.1 Hz in XLPE medium
voltage power cables Cuthbert NYAMUPANGEDENGU - University of the Witwatersrand, Johannesburg; South
Africa
Jerry WALKER - Walmet Technologies (Pty) Ltd, Vereeniging; South Africa
E.5.2.3 Partial discharge pattern characteristics of 220 kV XLPE power cable joints with
artificial defect ZHANG Xuejin, PAN Leilei - Shanxi Taiyuan Electric Power Supply Company, Taiyuan;
China
LUO Junhua, LI Wenjie, XIA Rong - State Grid Electric Power Research Institute, Wuhan,
Hubei province; China E.5.2.4 High frequency signal propagation in solid dielectric tape shielded power cables
Jun (Jim) GUO, Rick STAGI - Utilx Corporation, Kent, WA; United States

Page 16
Page 16 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011 E.5.2.5 Dependency of the dissipation factor on the test-voltage and the ageing status of MV
PILC cables Ivana MLADENOVIC, Christian WEINDL - University of Erlangen-Nuremberg, Institute of
Electrical Power Systems, Erlangen; Germany E.5.2.6 A novel anti-interference method for partial discharge on-line measurement of HV
power cables LI Wenjie, LUO Junhua, ZHAO Jiankang, XIA Rong, MENG Shaoxin - State Grid Electric
Power Research Institute, Wuhan, Hubei province; China
ZHANG Xuejin, PAN Leilei - Shanxi Taiyuan Electric Power Supply Company, Taiyuan;
China E.5.2.7 Electrical tree and partial discharge degradation characteristics in XLPE cable
insulation at high temperature FENG Yi - Beijing Electric Test and Research Institute, Beijing; China CHEN Xiangrong, XU Yang, CAO Xiaolong - State Key Laboratory of Electrical Insulation
and Power Equipment, Xi��an Jiaotong University, Xi'an; China E.5.2.8 VLF tan-delta measurement on submarine cables in KEPCO
LEE Jae-bong, JUNG Yeon-ha - KEPCO Research Institute, Daejeon; Korea KIM Sung-min, KWON Tae-joon - KEPCO Head Office, Seoul; Korea
E.5.2.9 Partial discharge feature selection and evaluation using an enhanced recursive
feature elimination (RFE) algorithm Jean Carlos HERNÁNDEZ, Jes��s VELAZCO - Universidad de Los Andes, M��rida, M��rida;
Venezuela
Joshua PERKER - Georgia Institute of Technology, Atlanta, GA; United States
E.5.2.10Investigation of power frequency current transformer as partial discharge sensor in
medium voltage cables Faisal PEER MOHAMED, Wah Hoon SIEW, John SORAGHUN, Scott STRACHAN -
University of Strathclyde, Glasgow, Scotland; United Kingdom E.5.2.11A new lumped model for electrical treeing in XLPE cable insulations
Abbas NAJAFIPOUR, Sayyed Mohammad SHAHRTASH - Iran University of Science and
Technology (IUST), Tehran; Islamic Republic of Iran E.5.2.12PD signal compensation in cable terminals and classification for HV cable insulation
assessment Mohsen BAKHSHI ASHTIANI, Mohammad SHAHRTASH - Iran University of Science and
Technology (IUST), Tehran; Islamic Republic of Iran E.5.2.13Pulse signal propagation characteristics on the aged XLPE cable
TAKAHASHI Tosihiro, KURAISHI Takashi, TAKAHASHI Tsuguhiro, SUZUKI Hiroshi, OKAMOTO Tatsuki - Central Research Institute of Electric Power Industry (CRIEPI),
Yokosuka; Japan E.5.2.14Equipment for fast water trees resistance measurement of power cable insulations
Sorin GRIGORESCU, Mihai Gabriel PLOPEANU, Petru NOTINGHER - Politehnica
University of Bucharest, Bucharest; Romania
Cristina STANCU - INCDIE ICPE CA, Bucharest; Romania
E.5.2.15VLF tan-delta criteria for XLPE insulated power cables in KEPCO
LEE Jae-bong, JUNG Yeon-ha - KEPCO Research Institute, Daejeon; Korea KIM Sung-min, KWON Tae-joon - KEPCO Head Office, Seoul; Korea
E.5.2.16Experiences of diagnosis of HV cables with damped AC technique
Zolt��n Ád��m TAMUS, Rich��rd CSELKÓ - Budapest University of Technology and
Economics, Budapest; Hungary
Tam��s SCHACHINGER, R��bert EGYED - GA Hungary Ltd., Törökbalint; Hungary

Page 17
Page 17 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011 E.5.2.17Thermal step method - A non-destructive tool for lifetime estimation of treed cables
insulation Cristina STANCU - INCDIE ICPE CA, Bucharest; Romania Petru NOTINGHER JR. - Universite Montpellier 2, Institut d��Electronique du Sud, Groupe
Energie et Materiaux, Montpellier; French Southern Territories
Petru V. NOTINGHER, Mihai Gabriel PLOPEANU - Politehnica University of Bucharest,
Bucharest; Romania
SESSION A.6
Submarine - Cable Systems
Tuesday June 21st, 2011 - 14:30 - 16:00 Room A
Chairman : Anders H. GUSTAFSSON - ABB AB - High Voltage Cables (Sweden) Rapporteur : David DUBOIS - Nexans (France) A.6.1
Offshore wind parks grids connection projects in German North Sea Dongping ZHANG, Jochen JUNG, Thomas Jan LEBIODA - Tennet Offshore GmbH,
Bayreuth; Germany A.6.2
High capacity HVDC subsea link for the UK Gareth PARKER - NGET, Warwick; United Kingdom Paul CUNNINGHAM - Scottish Power, Glasgow, Scotland; United Kingdom
A.6.3
Cables for deep water applications Marco BACCHINI, Marco MARELLI, Ambrogio ORINI - Prysmian PowerLink, Milan; Italy
A.6.4
Application of XLPE submarine power cable for extra high voltage YANAGAWA Hiroyuki, MATSUNAGA Osamu, NAKAGAWA Toshihiro, ASAI Shinya -
J-Power Systems Corporation, Hitachi, Ibaraki; Japan
KURATA Tatsuo - J-Power Systems Corporation, Osaka; Japan MASHIO Shoji - J-Power Systems Corporation, Tokyo; Japan
A.6.5
HVAC power transmission to the Gjøa platform Erik ERIKSSON, Marc JEROENSE, Magnus LARSSON-HOFFSTEIN, Claes SONESSON
- ABB AB, High Voltage Cables, Karlskrona; Sweden
Knut-Aril FARNES, Rolf Ove RÅD, Karl Atle STENEVIK - Statoil AS, Stavanger; Norway
A.6.6
Corrosion behaviour of submarine power cables in seawater environments Daniel ISUS, Juan de Dios MARTÍNEZ - General Cable Sistemas S.A., Manlleu, Barcelona;
Spain
Virginia MADINA, Patricia SANTA COLOMA - TECNALIA, San Sebasti��n; Spain
SESSION B.6
Ageing and life expectancy (1)
Tuesday June 21st, 2011 - 14:30 - 16:00 Room B
Chairman : John SMITH III - General Cable Corporation (USA) Rapporteur : Fr��d��ric PEURTON - Nexans (France) B.6.1
Nuclear cables: Lifetime simulation and new approach for the study of polymer ageing Carole MONCHY-LEROY - EDF R&D, Moret-sur-Loing; France Patrice THÉROND - EDF SEPTEN, Villeurbanne; France
B.6.2
Condition assessment of transmission power cables Edward GULSKI - onsite.hv.solutions AG, Luzern; Switzerland Piotr CICHECKI, Johan J. SMIT - Delft University of Technology, Delft; The Netherlands Frank De VRIES - Liandon, Alkmaar; The Netherlands Jan PELLIS - Stedin, Rotterdam; The Netherlands

Page 18
Page 18 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011
Frank WESTER - TenneT, Arnhem; The Netherlands
B.6.3
Development of external diagnosis for XLPE cable terminations SUYAMA Hiroshi, KOHAMA Takaharu, MORISHITA Yukinobu - Chubu Electric Power Co.,
Inc., Nagoya; Japan
WATANABE Masao, NAGAYAMA Tadanori - Tohoku Electric Power Co., Inc., Sendai;
Japan
ABE Kazutoshi, SUZUKI Hiroshi - J-Power Systems Corporation, Hitachi, Ibaraki; Japan
B.6.4
Aging performance of the new type outdoor termination using composite insulator IIDA Tomoo, SHIRO Tadahiko, TANIGOCHI Minoru - The Kansai Electric Power Co,. Inc.,
Osaka; Japan
HOMMA Hiroya - Central Research Institute of Electric Power Industry (CRIEPI), Yokosuka;
Japan
INOUE Yoshiyuki, HAGISAWA Kazuhisa - J-Power Systems Corporation, Tokyo; Japan
B.6.5
Ageing UG systems: The SmartLife initiative Hallvard FAREMO - SINTEF Energy Research, Trondheim; Norway Frank De WILD - KEMA, Arnhem; The Netherlands Éric DORISON - Électricit�� de France, Moret-sur-Loing; France
B.6.6
Improvement of an health index from ageing studies and field outcome Benoît PULUHEN, Éric DORISON, Yves BRUMENT - EDF R&D, Moret-sur-Loing; France
SESSION C.6
Cables for the future - Superconductivity
Tuesday June 21st, 2011 - 14:30 - 16:00 Room C
Chairman : David LINDSAY - EPRI (USA) Rapporteur : Jean-Maxime SAUGRAIN - Nexans (France) C.6.1
Operation experience and further development of a high temperature superconducting power cable in the Long Island Power Authority grid Frank SCHMIDT, Rainer SOIKA - Nexans Deutschland GmbH, Hannover; Germany James MAGUIRE, Jie YUAN - American Superconductor Corporation, Devens, MA; United
States
Shawn BRATT - Air Liquide Advanced Technologies US LLC, Newark, NJ; United States Tom WELSH - Long Island Power Authority, Hicksville; United States
C.6.2
Development of 275 kV 3 kA HTS power cable MUKOYAMA Shinichi, YAGI Masashi, YONEMURA Tokui, NOMURA Tomoya, TENG Jun -
Furukawa Electric, Ichihara, Chiba; Japan
OHKUMA Takeshi, MARUYAMA Osamu - Superconductivity Resaerch Laboratory,
Shinonome, Tokyo; Japan
AOKI Yuji - SWCC Showa Cable Systems, Sagamihara, Kanagawa; Japan SAITOU Takashi - Fujikura, Sakura, Chiba; Japan AMEMIYA Naoyuki - Kyoto University, Saikyo-ku, Kyoto; Japan ISHIYAMA Atsushi - Waseda University, Shinjuku-ku, Tokyo; Japan HAYAKAWA Naoyuki - Nagoya University, Chigusa-ku, Nagoya; Japan
C.6.3
A breakthrough in the development of long-length HTS cables with integrated FCL property Irina MELNIK, Alex GESCHIERE - Alliander, Duiven; The Netherlands Dag WILLÉN - nkt cables, Broendby; Denmark Oleg CHEVTCHENKO - TU Delft, Delft; The Netherlands
C.6.4
Superconducting HVDC power cables: Concepts and potential Rainer SOIKA, Erik MARZAHN, Frank SCHMIDT, Mark STEMMLE, Beate WEST - Nexans
Deutschland GmbH, Hannover; Germany

Page 19
Page 19 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011
Nicolas LALLOUET - Nexans France, Calais; France
C.6.5
HTS cable project in Yokohama MASUDA Takato, YUMURA Hiroyasu, HIROTA Hirofumi - Sumitomo Electric Industries,
Ltd., Osaka; Japan
HONJO Shoichi, HARA Tsukushi - Tokyo Electric Power Company, Yokohama; Japan
C.6.6
Novel grid concepts for urban area power supply Mark STEMMLE - Nexans Deutschland GmbH, Hannover; Germany Frank MERSCHEL - RWE Rheinland Westfalen Netz AG, Essen; Germany Bernd R. OSWALD - Leibniz University of Hannover, Hannover; Germany Mathias NOE - Karlsruhe Institute of Technology, Karlsruhe; Germany
SESSION D.6
LV and MV Cable Systems
Tuesday June 21st, 2011 - 14:30 - 16:00 Room D
Chairman : Ngapuli Irmea SINISUKA - ITB, Institut Teknologi Bandung (Indonesia) Rapporteur : St��phane TOGNALI - Prysmian Câbles et Syst��mes (France) D.6.1
Ultra low weight combined LV/FO cable for steep cable car pathway Boris DARDEL, Marc BRESSENEL, Jean WITTWER, François COCHET - Nexans Suisse
SA, Cortaillod; Switzerland D.6.2
Influence of the additives on the water-treeing in XLPE insulated cables Emeric LONG, Isabelle DENIZET, Bernard POISSON - Silec Cable (General Cable),
Montereau; France
Elisenda CASALS - General Cable, Manlleu, Barcelona; Spain
D.6.3
Reliability evaluation of distribution cable diagnosis instruments with field test PARK Noh-joon - Center for Advanced Electric Application, Wonkwang University, Iksan,
Jeonbuk; Korea
PARK Dae-hee - Dept. of Electrical, Information & Communication Engineering, Wonkwang
University, Iksan, Jeonbuk; Korea D.6.4
The application of optical fiber composite low-voltage cable (OPLC) in smart grid of China BAO Jicong, QIAO Xinxia, QIAN Ziming - Jiangsu Hengtong Power Cable Co., Ltd, Wujiang
City, Jiangsu Province; China D.6.5
Insulation state analysis and upgrading feasibility study of existing AC 10 kV XLPE distribution cables in Jiangsu grid of China ZHANG Ziyang, FEI Yijun - Jiangsu Electric Power Research Institute Corporation LTD,
Nanjing, Jiangsu; China D.6.6
70 years of MV cables in Brazil: Reliability of cables, splices and potheads Geraldo de ALMEIDA, Luiz ZANETTA - University of Sao Paolo - USP, Sao Paolo; Brazil Ricardo BRANDÃO - AES Eletropaulo, Sao Paolo; Brazil Walter PINHEIRO - Matrix Engenharia, Sao Paolo; Brazil
SESSION A.7
Submarine - Cable performance
Tuesday June 21st, 2011 - 16:30 - 18:15 Room A
Chairman : Gunnar EVENSET - Nexans Norway AS (Norway) Rapporteur : Nathalie BOUDINET - RTE - CNER (France) A.7.1
Submarine cable metallic sheath diagnostic Harry ORTON - Orton International Consulting, Vancouver, BC; Canada

Page 20
Page 20 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011
Avaral RAO - Powertech, Vancouver, BC; Canada David KUNG - Powertech, Vancouver, BC; Canada David HICKS - Newfoundland Hydro, St Johns, NFLD; Canada
A.7.2
Influence of subsea conditions on the long term performance of AC XLPE cables Kenneth JOHANSSON, Anna DAVIDSSON - Draka Sverige AB, Nässjö; Sweden Martin JAKOBSSON, Ulf. H. NILSSON, Jan-Ove BOSTRÖM - Borealis AB, Stenungsund;
Sweden
Hallvard FAREMO, Odd LILLEVIK - SINTEF Energy Research, Trondheim; Norway
A.7.3
Armouring loss in three-core submarine XLPE cables Danijela PALMGREN, Johan KARLSTRAND, Gunnar HENNING - ABB, Karlskrona;
Sweden A.7.4
On the optimum burial depth of submarine power cables Thomas WORZYK, Johan KARLSTRAND - ABB, Karlskrona; Sweden
A.7.5
Development and qualification of deepest water power umbilical Arild FIGENSCHOU, Jan Ole DUNSERUD - Aker Solutions, Oslo; Norway Daniel ISUS - Grupo General Cable Sistemas S.A., Manlleu, Barcelona; Spain Emmanuel BIC - Silec Cable (General Cable), Montereau; France
A.7.6
Dielectric loss characterization of Hydro-Qu��bec medium voltage (MV) submarine cables - Phase 1 Jean-François DRAPEAU - Institut de recherche d'Hydro-Qu��bec (IREQ), Varennes,
Qu��bec; Canada
Bruno CANTIN - Hydro-Qu��bec Distribution, Qu��bec, QC; Canada Nigel HAMPTON, Joshua PERKEL - NEETRAC, Atlanta, GA; United States
SESSION B.7
Ageing and life expectancy (2)
Tuesday June 21st,, 2011 - 16:30 - 18:15 Room B
Chairman : Ja Yoon KOO - School of Elect. Eng. and Computer Science, Hanyang University (Korea) Rapporteur : Mohamed MAMMERI - Silec Cable (General Cable) (France) B.7.1
US industry practices for MV cable fleet management David LINDSAY, Matthew OLEARCZYK - EPRI, Charlotte, North Carolina; United States
B.7.2
Condition and life assessment of laminar dielectric cable systems through dissolved gas analysis based on field trials and extensive field data Nirmal SINGH, Sandeep SINGH - DTE Energy, Detroit, MI; United States Rommy REYES, Pierre LINOIS - RTE, Nanterre, Paris; France Steve ECKROAD - EPRI, Charlotte, NC; United States
B.7.3
Condition monitoring of electrical cables using line resonance analysis (LIRA) Franco Paolo FANTONI - Wirescan AS, Halden; Norway
B.7.4
Investigation of remained withstand voltage level and water tree degradation on aged and removed XLPE cable TAKAHASHI Tosihiro, KURAISHI Takashi, TAKAHASHI Tsuguhiro, SUZUKI Hiroshi, OKAMOTO Tatsuki - Central Research Institute of Electric Power Industry (CRIEPI),
Yokosuka; Japan
TANAKA Sachika, SHIRO Tadahiko, MATSUYA Yuuji - The Kansai Electric Power Co.,
Inc., Osaka; Japan B.7.5
Evaluation results of PILC cables field aged 7 to 68 years Vitaliy YAROSLAVSKY, Carlos KATZ - Cable Technology Laboratories, New Brunswick,
NJ; United States

Page 21
Page 21 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011
David LINDSAY, Matthew OLEARCZYK - Electric Power Research Institute, Charlotte, NC;
United States B.7.6
A study on the effect of performing VLF withstand tests on field aged degraded joints Jean-François DRAPEAU, Simon BERNIER - Institut de recherche d'Hydro-Qu��bec
(IREQ), Varennes, Qu��bec; Canada
Jacques CÔTÉ - Hydro-Qu��bec Distribution, Montr��al, Qu��bec; Canada
SESSION C.7
DTS: Distributed Temperature Sensing
Tuesday June 21st,, 2011 - 16:30 - 18:15 Room C
Chairman : Mohamed CHAABAN - Institut de recherche d'Hydro-Qu��bec (Canada) Rapporteur : Christophe MOREAU - EDF R&D (France) C.7.1
Improvements of underground cable distribution systems in the area of Mexico City Edgar ROBLES - Instituto de Investigaciones Electricas, Cuernavaca, Morelos; Mexico Victor SIERRA - ECSA, Huixquilucan, Estado de M��xico; Mexico
C.7.2
The research on temperature precision influenced by fiber loss based on distributed temperature system in cable monitoring LIU Qianqian, WANG Wei, ZHAO Sen - WHVRI Power Electric Science and Technology
Stock, Wuhan, Hubei province; China C.7.3
Research on online temperature monitoring method for cable connector XU Jun, SU Wenqun - Power Grid Inspection & Maintenance Company, SMEPC (Shanghai
Municiple Electrical Power Company), shanghai; China C.7.4
The necessity analysis of distributed fiber-optic temperature monitoring by Xiamen power cable alarm case study YAN Youxiang, SU Xueyuan - Xiamen power Ultility, Xiamen, Fujian; China XIAO Chuanqiang - SINDIA, Beijing; China
C.7.5
Low loss micro grid Lars EFRAIMSSON, Johan ÅHMAN, Thomas CARLQVIST - Ericsson AB, Falun; Sweden
C.7.6
New characterization and design of power cables systems Josu ORELLA, Jesus BESTEIRO, Virginia MACIAS - IBERDROLA, Bilbao; Spain
SESSION E.7.1
Cable Systems and Testing
Tuesday June 21st,, 2011 - 16:30 - 18:15 Room E: Poster Session
Chairman : John R. DENSLEY - ArborLec Solutions Inc. (Canada) Rapporteur : J��rôme MATALLANA - Nexans (France) E.7.1.1 The application of the Y-branch joints in TEPCO
WATANABE Kensuke, AIHARA Yasuhiko, TSUCHIYA Shinichi - Tokyo Electric Power
Company, Chiyoda-ku, Tokyo; Japan E.7.1.2 Environmentally sound lead-free insulation material for medium voltage energy
cables Amalendu SARKAR, John T. SMITH, III - General Cable Corporation, Indianapolis, Indiana;
United States E.7.1.3 Distribution of peroxide by-products along degassed XLPE HV cables
Christian ANDERSSON - Ericsson AB, Falun; Sweden Martin JAKOBSSON, Annika SMEDBERG, Jan-Ove BOSTRÖM - Borealis AB,

Page 22
Page 22 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011 Stenungsund; Sweden E.7.1.4 XLPE for medium and high voltage cables insulation: Determination of organic
peroxide's decomposition products by the most suitable analysis Alfredo DEFRANCISCI, Sandra GRIMALDI, Edwin-Jeoffrey COURTIAL - ARKEMA Centre
de Recherche Rhône-Alpes, Pierre-B��nite; France E.7.1.5 Prototype for detection of delaminations in the sheath system of high voltage power
cables using ultrasonic diagnosis Gregor BRAMMER, Armin SCHNETTLER - Institute for high voltage technologies, Aachen;
Germany E.7.1.6 Photoacoustics: An approach for online process control of degassing XLPE
insulated high voltage cables Hans BETTERMANN, Thomas GRETHE - Heinrich-Heine-university of Duesseldorf,
Duesseldorf; Germany
Anika BOSSE, Volker WASCHK - nkt cables GmbH, Köln; Germany
E.7.1.7 The research on XLPE cable insulation based on ground current method on-line
monitoring technique GU yonggang, ZHONG Pengjiao - WHVRI Power Electric Science and Technology Stock,
Wuhan, Hubei province; China
WANG Wei - State Grid Electric Power Research Institute, Wuhan, Hubei province; China
E.7.1.8 A versatile system for electrical treeing tests under AC and DC stress using wire
electrodes Anette JOHANSSON, Stanislaw GUBANSKI, Markus JARVID, Mats ANDERSSON -
Chalmers University of Technology, Gothenburg; Sweden
Björn SONERUD - Nexans Norway AS, Halden; Norway Villgot ENGLUND - Borealis AB, Stenungsund; Sweden Andreas FARKAS - ABB AB, Karlskrona; Sweden
E.7.1.9 Experimental study on detection equivalence of partial discharge at damped AC
voltages and 50 Hz AC voltages in 110 kV XLPE power cables XIA Rong, ZHAO Jiankang - State Grid Electric Power Research Institute, Wuhan, Hubei
province; China
Edward GULSKI - Delft University of Technology, Delft; The Netherlands
E.7.1.10Partial discharge test and disassembly analyze of cable termination in
Huanghoudian, Beijing ZHAO Yu, LI Huachun, HUANG Heming, XUE Qiang - Power Cable Company of Beijing
Electric Power Corporation, Beijing; China
JIANG Xiaoying - BeiJing Electric Power Cable Company, Beijing; China
E.7.1.11Power frequency magnetic field test and analyse of HV cables in tunnel
LI Huachun, WANG Li, LIU Hao - BeiJing Electric Power Cable Company, Beijing; China GUO Jianfu, ZHANG Wenxin - BeiJing Electric Power Cable Company, Beijing; China
E.7.1.12Negative k-factor setting for power cables explained via sequence impedance
measurements Wernich DE VILLIERS, Ulrich KLAPPER - Omicron, Klaus, Vorarlberg; Austria
E.7.1.13Various cable terminal defect types and environmental factors impact on the results
of PD test TU Na, WANG Wei - WHVRI Power Electric Science and Technology Stock, Wuhan, Hubei
province; China E.7.1.14Frequency characteristics of partial discharges in MV extruded cables using
non-conventional sensors LEE Young-jo, KIM Jong-yeol, SEO In-jin, KOO Ja-yoon - Hanyang University, Ansan,

Page 23
Page 23 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011 Gyeong-Gi; Korea
JEONG Jae-cheol, KIM Jeong-tae - Daejin University, Phochon, Gyeong-Gi; Korea
E.7.1.15PD monitoring system of HV cable
Miguel Ángel SÁNCHEZ URÁN, Fernando GARNACHO VECINO, Javier ORTEGO, Jorge MORENO, Fernando ÁLVAREZ, Oscar PERPIÑAN - Polytechnik University of Madrid,
Madrid; Spain
Julio GONZALO GARCÍA, Jos�� Luis VALLEJO DIEZ - GasNatural Fenosa, Madrid; Spain
E.7.1.16Using after installation commissioning tests to assure power cable systems meet
manufacturers' standards Stefaan JESPERS - Cegelec, Brussels; Belgium Massimo VANOSSI - Foster Wheeler Italiana, Corsico, Milan; Italy Marco GREEN - IMCORP, Rendsburg; Germany Benjamin LANZ - IMCORP, Manchester, Connecticut; United States
SESSION E.7.2
HV and EHV Cable Systems and Design
Tuesday June 21st,, 2011 - 16:30 - 18:15 Room E: Poster Session
Chairman : Kieron LEEBURN - CBI-electric: African Cables Ltd (South Africa) Rapporteur : Raymond PETRUS - Silec Cable (General Cable) (France) E.7.2.1 Silicone technology for reliable performance of joints and terminations for high
voltage polymer power cables Ruben VOGELSANG, Hansjörg GRAMESPACHER - Brugg Cables, Brugg; Switzerland Hans-Jörg WINTER, Martin GRUNWALD - Wacker Chemie AG, Brughausen; Germany
E.7.2.2 Improving surface smoothness of semi conductive shields by blending ethylene
copolymers Laurent GERVAT, S��bastien QUINEBECHE - ARKEMA, Serquigny; France Oliver HISSMANN - OCS, Witten; Germany
E.7.2.3 Influence of voids within electric fields in HVDC cables
Sebasti��n GUTIERREZ, Sancho IÑAKI, Luis FONTAN, Jose MALUMBRES - CEIT and
Tecnun (University of Navarra), San Sebasti��n, Gipuzkoa; Spain E.7.2.4 Investigation of the life curve for high voltage cable insulation
Mikhail Y. SHUVALOV, Vladimir L. OVSIENKO - Russian Cable Scientific Research and
Development Institute (VNIIKP), Moscow; Russia E.7.2.5 Selection research of protection earthing set-up of HV cable
ZHOU Li, ZHOU Zhicheng - Jiangsu Electric Power Research Institute Corporation LTD,
Nanjing, Jiangsu; China
JI Wenlu - Nanjing Power Supply Company, Nanjing, Jiangsu; China
E.7.2.6 The investigation and application of multi-state monitoring system to high voltage
cables and tunnels ZHOU Zuochun, ZHANG Yanyan - Beijing Electric Test and Research Institute, Beijing;
China
CONG Guang - BeiJing Electric Power Cable Company, Beijing; China WANG Li, XUE Qiang, LI Huachun - Power Cable Company of Beijing Electric Power
Corporation, Beijing; China
ZHANG Wenxin - Beijing Power Engineering Company, Beijing; China
E.7.2.7 AC withstand voltage test of 345 kV cable system
KIM Jae-seung, MIN Byeong-wook, KIM Tai-young - KEPCO, Seoul; Korea
E.7.2.8 Voltage stabilizers for XLPE cable insulation
Thomas HJERTBERG, Villgot ENGLUND - Borealis AB, Stenungsund; Sweden

Page 24
Page 24 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011 E.7.2.9 Development and construction of 345 kV Power-Optical Fiber Composite XLPE 2500
mm2 with prefabricated joints YOON Hyung-hee, PAIK Nam-yeol, LEE Koan-seong, KIM Soo-hwan, OH Jong-ok, LEE Seung-hyun - Korea Electric Power Corporation (KEPCO), Seoul; Korea
E.7.2.10Study and application of cable network operation monitoring system in Beijing
WANG Li, LI Huachun, XUE Qiang - BeiJing Electric Power Cable Company, Beijing; China ZHOU Zuochun, CONG Guang - BeiJing Electric Power Cable Company, Beijing; China
E.7.2.11High temperature silicone elastomers for rolling stock cables
Bernard DALBE - Nexans Research Center, Lyon; France
E.7.2.12Electrical, thermal and thermo-mechanical design of MV XLPE cables
Rohini BHATTACHARYYA - Dubai Cable Company Pvt. Ltd. (Ducab), Dubai; UAE
E.7.2.13Study of 500 kV cable terminal insulation structure
WANG Wei, ZHAO Sen, LI Zhongqun - State Grid Electric Power Research Institute,
Wuhan, Hubei province; China
WANG Xixing - WHVRI Power Electric Science and Technology Stock, Wuhan, Hubei
province; China E.7.2.14Multiconductor cell analysis of shunt compensated cable lines
Roberto BENATO - University of Padova, Padova; Italy
E.7.2.15Optimal design for power cable metal sheath voltage compensation device
WANG Guangming, ZHANG Xing, WANF Donghai, WANG Chunning - Nanjing Power
Supply Company, Nanjing, Jiangsu; China
MA Hongzhong - HoHai University, Nanjing, Jiangsu; China
E.7.2.16Sequence impedance computation by means of multiconductor method
Roberto BENATO, Leandro CACIOLLI, Ernesto ZACCONE - Prysmian Powerlink, Milan;
Italy E.7.2.17Implementation of cable models for studies of compatibility of electric components
in wind farms Andrzej HOLDYK, Joachim HOLBOELL - Technical University of Denmark, Department of
Electrical Engineering, Kongens Lyngby; Denmark E.7.2.18Performance tests on large conductors connectors
François GAHUNGU, Pierre MIREBEAU - Nexans, Calais; France Pascal STREIT - Nexans, Cossonay; Switzerland
E.7.2.19Performance analysis of optical fiber composite low-voltage cable
ZHANG Ye, CHEN xi, ZHAO daping, QI Liyan, HOU Jiyong, LIU Hao, WANG Peng, AN Huirong, WANG Shuling, JIA Meijian, XU Gaoxiong, FENG Xuebin - China Electric Power
Research Institute, Beijing, Haidian; China E.7.2.20EMF mitigation using steel pipes : Effect on cable thermal rating
Thierry BOUCHER, Éric DORISON - EDF R&D, Moret-sur-Loing; France
E.7.2.21P-Laser: 10.000 km of installed cables based on a worldwide new technology
Sergio BELLI, Gabriele PEREGO, Luigi CAIMI, Alberto BAREGGI, Vincenzo CRISCI, Giovanni POZZATI, Stefano FRANCHI, Marco ALBERTINI, Fabrizio DONAZZI, Ernesto ZACCONE, Agusti VALLS - Prysmian S.p.A., Milan; Italy
SESSION A.8
Testing methods - Factory and after laying tests
Wednesday June 22nd, 2011 - 9:00 - 10:30 Room A
Chairman : Dirk RITTINGHAUS - Energycableconsult (Germany)

Page 25
Page 25 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011 Rapporteur : Bernard DHUICQ - Silec Cable (General Cable) (France) A.8.1
A measuring system of conductor AC and DC resistance Karl-Erik RYDLER - SP Technical Research Institute of Sweden, Boras; Sweden Mats SJOBERG, Jorgen SVAHN - ABB AB, Karlskrona; Sweden
A.8.2
Advanced measurement of AC resistance on skin-effect reduced large conductor power cables Gero SCHROEDER, Johannes KAUMANNS - Suedkabel GmbH, Mannheim; Germany Ronald PLATH - Ing.-B��ro HPS Berlin, Berlin; Germany
A.8.3
New generation of on-site testing technology for transmission power cables Rogier JONGEN, Paul SEITZ, Ben QUAK - Seitz Instruments AG, Niederrohrdorf;
Switzerland
Frank De VRIES - Liandon BV, Alkmaar; The Netherlands Piotr CICHECKI - Delft University of Technology, Delft; The Netherlands
A.8.4
A new approach for testing long HV and UHV cables Peter MOHAUPT, Tobias MEHL - Mohaupt High Voltage GmbH, Mieders; Austria
A.8.5
Alternatives for HVAC testing of long HV cables in the factory and on-site Frank SCHREITER, Stefan SCHIERIG, Peter COORS - HIGHVOLT Pr��ftechnik Dresden
GmbH, Dresden, Saxony; Germany A.8.6
Effectiveness of variable frequency resonant method for after-laying test on high voltage extruded cable ZHAO Jiankang, OUYANG Benhong, RAO Wenbin, LI Wenjie, XIA Rong - State Grid
Electric Power Research Institute, Wuhan, Hubei province; China
SESSION B.8
Partial discharges and diagnostics (1)
Wednesday June 22nd, 2011 - 9:00 - 10:30 Room B
Chairman : Ronald PLATH - Ing.-B��ro HPS (Germany) Rapporteur : Minh Nguyen TUAN - EDF R&D (France) B.8.1
Evaluation of PD measurements on MV cable systems by means of a web database Frank PETZOLD - SebaKMT GmbH, Baunach; Germany Steffen BÖTTCHER - FSG GmbH, Freital; Germany
B.8.2
Intelligent DTS and PD monitoring system for underground distribution network KIM Juyong, CHO Jintae, SONG Ilkeun, LEE Jae-bong - KEPCO, Daejeon; Korea CHOI Taesik - LS Cable Ltd, Anyang; Korea
B.8.3
Comparison of different methodologies to assess the lifetime of cable Jean Christophe GARD, Karine BIC, Bernard POISSON - Silec Cable (General Cable),
Montereau; France
Francisco ESPINOSA - General Cable, Manlleu, Barcelona; Spain
B.8.4
Optical PD detection in stress cones of HV cable accessories Markus HABEL, Klaus VATERRODT, Gerd HEIDMANN - IPH - Institut "Prueffeld fuer
elektrische Hochleistungstechnik" GmbH, Berlin; Germany
Wolfgang HABEL - Bundesanstalt fuer Materialforschung und -pruefung, Berlin; Germany Ruben VOGELSANG, Werner WEISSENBERG, Oldrich SEKULA - Brugg Cables, Brugg;
Switzerland
Daniel PEPPER - Beuth Hochschule fuer Technik, Berlin; Germany Ronald PLATH - HPS Berlin, Berlin; Germany Harald EMANUEL - Omicron, Klaus, Vorarlberg; Austria
B.8.5
PD monitoring of 132 kV XLPE cable outdoor terminations: Practical experience

Page 26
Page 26 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011
Valentinas DUBICKAS, Andreas DERNFALK - STRI AB, Ludvika; Sweden
B.8.6
Critical review of three capacitor model for PD estimation in micro-voids of polymer insulated cables Luigi TESTA - Techimp, Bologna; Italy Andrea CAVALLINI, Gian Carlo MONTANARI - University of Bologna, Bologna; Italy
SESSION C.8
Cable rating - General
Wednesday June 22nd, 2011 - 9:00 - 10:30 Room C
Chairman : Robert ROSEVEAR - Southampton Dielectric Consultant Ltd. (UK) Rapporteur : Fr��d��ric LESUR - RTE (France) C.8.1
Factors affecting the optimal cable placement in duct banks or casings for best ampacity or power Wael MOUTASSEM - University of Toronto, Toronto, Ontario; Canada George ANDERS - Kinectrics Inc., Toronto, Ontario; Canada
C.8.2
Finite element analysis of SIWO-KUL (trade mark) cables Sandrine FRANÇOIS - Nexans Research Center, Lyon; France François COCHET - Nexans Suisse SA, Cortaillod; Switzerland Bruno WEIDER - Nexans Schweiz AG, Breitenbach; Switzerland
C.8.3
Current rating of cables installed in deep or ventilated tunnels Éric DORISON - Électricit�� de France, Moret-sur-Loing; France George ANDERS - Kinectrics Inc., Toronto, Ontario; Canada
C.8.4
Reduction in current carrying capacity due to cables crossing Mohamed CHAABAN, Jean LEDUC - Institut de recherche d'Hydro-Qu��bec (IREQ),
Varennes, Qu��bec; Canada C.8.5
Research on ampacity testing for middle-voltage cross-linked polyethylene (XLPE) cable CAI Chengliang, WANG Yongqin - Hubei Electric Power Testing and Research Institute,
Wuhan, Hubei province; China C.8.6
Research of upgrading ampacity for high voltage XLPE power cable FAN Youbing, ZHAO Jiankang, LIU Songhua, MENG Shaoxin, RAO Wenbin - State Grid
Electric Power Research Institute, Wuhan, Hubei province; China
SESSION A.9
Testing methods - Qualification and Qualification extension
Wednesday June 22nd, 2011 - 11:00 - 12:30 Room A
Chairman : Willem BOONE - Kema Nederland BV (The Nederlands) Rapporteur : Jonathan BENETEAU - RTE - CNER (France) A.9.1
Working out extension of qualification procedures for HV and VHV cable systems Pierre HONDAA - RTE, Paris; France Éric DORISON - EDF R&D, Moret-sur-Loing; France
A.9.2
Results of robustness test on medium voltage joints Christophe TOURCHER, Christophe MOREAU - EDF R&D, Moret-sur-Loing; France Roger TAMBRUN - ERDF, Paris La D��fense; France
A.9.3
Tests of outer protection for buried joints, experience and recommendation Edwin PULTRUM, Pieter KUIJPERS, Wouter SLOOT - KEMA, Arnhem; The Netherlands
A.9.4
Development of technology and equipment of PQ test for 500 kV XLPE cable

Page 27
Page 27 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011
systems YANG Liming, XU Linhua, MENG Shaoxin, XIA Rong - State Grid Electric Power Research
Institute, Wuhan, Hubei province; China
YANG Rongkai, HOU Junping - Quality Inspection and Test Center for Equipment of
Electric Power, Wuhan, Hubei province; China A.9.5
HV cable qualification for IEC 62067-2006 and ICEA S-108-720-2004 Caryn RILEY, Raymond C. HILL, Nigel R. HAMPTON - NEETRAC, Atlanta, GA; United
States A.9.6
Special heat cycle voltage test of 275 kV XLPE cable system Bernardo DAVID, Nicola MOFFA, John McCORMACK, Peter BUTTERFIELD-ROSSI -
Electranet, Adelaide, South Australia; Australia
KIM Jeong hyun - Taihan Electric Co, Seoul; Korea HEO Hoi-deok - LS Cable Ltd, Gumi, Gyeongbuk; Korea George BUCEA - Consultant, Sydney; Australia Hans MAYER - Consultant, Melbourne, Victoria; Australia Henry KENT - Energy Action, Sydney; Australia
SESSION B.9
Partial discharges and diagnostics (2)
Wednesday June 22nd, 2011 - 11:00 - 12:30 Room B
Chairman : Shoshi KATAKAI - J-Powers Systems Co. (Japan) Rapporteur : Alain TOUREILLE - Montpellier University (France) B.9.1
Continuous PD monitoring of HV XLPE cable lines Wojciech KOLTUNOWICZ, Alija OBRALIC, Alexander BELKOV, Dietmar GISELBRECHT -
Omicron Electronics, Klaus, Vorarlberg; Austria B.9.2
The need for smart diagnostics in future smart grids - A practical example for MV cables Peter Van der WIELEN - KEMA Nederland BV, Arnhem; The Netherlands Fred STEENNIS - Eindhoven University of Technology, Eindhoven; The Netherlands Denny HARMSEN - Alliander N.V., Arnhem; The Netherlands Danny GELDTMEIJER - Enexis B.V., Rosmalen; The Netherlands
B.9.3
On-line partial discharge monitoring for MV cables with SCG - Practical experiences in the period 2007 to 2010 Fred STEENNIS, Ad KERSTENS - KEMA, Arnhem; The Netherlands Theo Van RIJN, Piet SOEPBOER - Alliander, Arnhem; The Netherlands Jan MOSTERD, Leon BOKMA - Westland Infra, Poeldijk; The Netherlands Alfred ARTS - Enexis, Arnhem; The Netherlands Nico Van DONK, Branko CARLI - Stedin, Rotterdam; The Netherlands
B.9.4
The thermo mechanical behavior of joints in MV cable systems exposed to high current loads Fred STEENNIS - KEMA, Arnhem; The Netherlands Piet SOEPBOER - Enexis, Arnhem; The Netherlands Jan MOSTERD - Alliander, Arnhem; The Netherlands Peter BUYS - Stedin, Rotterdam; The Netherlands Piet OOSTERLEE - DELTA Netwerkbedrijf, Middelburg; The Netherlands Leon BOKMA - Westland Infra, Poeldijk; The Netherlands Ralf MEIER - Lovink Enertech, Terborg; The Netherlands
B.9.5
On-line PD spot testing and continuous monitoring for in service power cables - Techniques and field experiences Malcolm SELTZER-GRANT, Lee RENFORTH, Ross MACKINLAY - HVPD Ltd,
Manchester, Connecticut; United Kingdom

Page 28
Page 28 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011
Denis DENISOV, Hubert SCHLAPP, Frank PETZOLD - SebaKMT, Baunach; Germany
B.9.6
Sensitivity assessment for field PD measurements for HV and EHV cable accessories via laboratory tests Mark FENGER - Kinectrics Inc., Toronto, Ontario; Canada Jody LEVINE - HydroOne Networks, Toronto, Ontario; Canada
SESSION C.9
Dynamic cable rating
Wednesday June 22nd, 2011 - 11:00 - 12:30 Room C
Chairman : Frank DE WILD - Kema (The Netherlands) Rapporteur : Olivier MOREAU - EDF CIST (France) C.9.1
Statistical feedback approach in cyclic rating factor sizing Irina GARZULINO, Nicolas POUPARDIN, Anne CHAUVANCY, Fr��d��ric LESUR, Xavier ROLLAND-NEVIERE - RTE, Paris; France
C.9.2
Dynamic rating of transmission cables Erik JACOBSEN, Jonas Fabricius NIELSEN, Steen Beck NIELSEN - SEAS-NVE Holding,
Haslev; Denmark
Sven SALWIN - nkt cables A/S, Copenhagen; Denmark Karl-Heinz COHNEN, Andreas MOHRS - nkt cables GmbH, Köln; Germany
C.9.3
Online ampacity determination of a 220 kV cable using an optical fibre based monitoring system Michael SCHMALE - TenneT TSO GmbH, Bayreuth; Germany Ralf PUFFER - RWTH Aachen University, Aachen; Germany Ulrich GLOMBITZA - OSSCAD GmbH & Co. KG, Bergisch Gladbach; Germany Henrik HOFF - AP Sensing GmbH, Boeblingen; Germany
C.9.4
Feasibility study report on dynamic cable rating system retrofitted to the existing 138 kV XLPE cable system IGI Tsuyoshi, KOMEDA Hidehiko - J-Power Systems Corporation, Hitachi, Ibaraki; Japan MASHIO Shoji - J-Power Systems Corporation, Tokyo; Japan Jade WONG, Arnold WONG - ConEdison, New York, NY; United States
C.9.5
Real time load optimisation of cable based transmission grids Rasmus Schmidt OLSEN, Unnur Stella GUDMUNDSDÓTTIR - Energinet.dk, Fredericia;
Denmark
Joachim HOLBOELL - Technical University of Denmark, Kongens Lyngby; Denmark
C.9.6
Impact of moisture migration on the current rating of high operating temperature cables James PILGRIM, David SWAFFIELD, Paul LEWIN - University of Southampton,
Southampton; United Kingdom
Steve SWINGLER - Southampton Dielectric Consultants, Southampton; United Kingdom Francis WAITE, David PAYNE - National Grid, Warwick; United Kingdom
SESSION E.9
Young Researcher Contest
Wednesday June 22nd, 2011 - 11:00 - 12:30 Room E: Poster Session
Chairman : Nouredine HADJ-SAID - Grenoble INP (France) Rapporteur : J��rôme HERRÉROS - RTE (France) E.9.1 The program of this Poster Session which will contain the papers from the Young Researchers will be published later.

Page 29
Page 29 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011
SESSION A.10
Testing methods - On line testing
Wednesday June 22nd, 2011 - 14:30 - 16:00 Room A
Chairman : Antony FALCONER - Aberdare Cables (South Africa) Rapporteur : Laurent BENARD - Prysmian Câbles et Syst��mes (France) A.10.1 Investigation on the technologies for defect localization and characterization on
medium voltage underground lines Gonzalo MAIZ - Iberdrola Distribuci��n, Bilbao; Spain Armando RODRIGO - Instituto Tecnol��gico de la Energ��a, Paterna; Spain Pedro LLOVERA-SEGOVIA - Instituto de Tecnolog��a El��ctrica - Universidad Polit��cnica de
Valencia, Valencia; Spain
Lluis SALES - Prysmian Cables y Sistemas, Barcelona; Spain Xavier BALZA - General Cable, Barcelona; Spain
A.10.2 First practical utility implementations of monitored withstand diagnostics in the USA
Chris FLETCHER - Duke Energy, Charlotte, NC; United States Nigel HAMPTON, Joshua PERKEL - NEETRAC, Atlanta, GA; United States Jean Carlos HERNANDEZ - Universidad de Los Andes, M��rida, M��rida; Venezuela Jeff HESSE - Duke Energy, Cincinnatti, OH; United States Mike PEARMAN - Georgia Power, Atlanta, GA; United States Tim WALL - Alabama Power, Birmingham, AL; United States Walter ZENGER - Pacific Gas & Electric, San Francisco, CA; United States
A.10.3 A new testing method of LV underground cable insulation
Janislaw TARNOWSKI, Jacques CÔTÉ, Andr�� GAUDREAU, Pierre GINGRAS, Mircea IORDANESCU - Hydro-Qu��bec, Varennes, Qu��bec; Canada
A.10.4 Integral cable condition assessment for the complete network
Alexander GERSTNER - Baur Pr��f - und Messtechnik, Sulz; Austria
A.10.5 Effect of supply voltage frequency on testing medium voltage cable in the grid
Fabrice ZORZI, Thierry ESPILIT - EDF R&D, Moret-sur-Loing; France Roger TAMBRUN - ERDF Direction R��seau, Paris La D��fense; France
A.10.6 On-line screening of MV cable network grid through partial discharge measurements
Marco TOZZI, Andrea CAVALLINI, Gian Carlo MONTANARI - Techimp HQ srl, bologna;
Italy
SESSION B.10
Design
Wednesday June 22nd, 2011 - 14:30 - 16:00 Room B
Chairman : Candelario SALDIVAR - Viakon Conductores Monterrey (Mexico) Rapporteur : Jos�� SANTANA - Prysmian Câbles et Syst��mes (France) B.10.1 Selecting the optimized conductor design
Riccardo BODEGA, Henk GEENE, Jos Van ROSSUM - Prysmian, Delft; The Netherlands Ron Van den THILLARD - TenneT, Arnhem; The Netherlands Jacco SMIT - Liandon, Alkmaar; The Netherlands Mark Van VLIET - Joulz, Rotterdam; The Netherlands
B.10.2 Investigations into the design of EMF mitigation techniques
Matthieu CABAU, Nadja MARAZANOF, Fr��d��ric LESUR, Nathalie BOUDINET, Anne CHAUVANCY, R��mi VATONNE - RTE, Paris; France
B.10.3 Development of cold-shrink HVCA in regard to the critical set of physical properties
Ivan JOVANOVIC, Milan UZELAC - G&W Electric Company, Blue Island, IL; United States

Page 30
Page 30 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011 B.10.4 Evolution in method and performance for bonding the metal screen of UG HV power
cable David DUBOIS, Pierre MIREBEAU, Pascal STREIT - Nexans, Calais; France NN NN - Silec Cable (General Cable), Montereau; France MM MM - Prysmian, Sens; France XX XX - RTE, Paris; France YY YY - Électricit�� de France, Paris; France
B.10.5 Special bonding and earthing of cables for a 230 kV three phase system with four
cables M��rcio COELHO - Procable Energia e Telecomunicações SA, Diadema, Sao Paulo; Brazil Geraldo ALMEIDA - Techsys Tecnologia e Sistemas S/C Ltda, Santo Andr��, Sao Paulo;
Brazil
Luiz ZANETTA - University of Sao Paolo - USP, Sao Paolo; Brazil
B.10.6 Special sheath bonding system for HVAC cables
Heinrich BRAKELMANN, Tao DONG - University Duisburg-Essen, Duisburg; Germany Volker WASCHK - nkt cables GmbH, Köln; Germany
SESSION C.10
Cable installation - General
Wednesday June 22nd, 2011 - 14:30 - 16:00 Room C
Chairman : Hans A. MAYER - Consultant (Australia) Rapporteur : Jean-Louis RAUD - Consultant - SERCE (France) C.10.1 Investigation into the benefits of installing high operating temperature cables in
tunnels James PILGRIM, David SWAFFIELD, Paul LEWIN - University of Southampton,
Southampton; United Kingdom
Steve SWINGLER - Southampton Dielectric Consultants, Southampton; United Kingdom Francis WAITE, David PAYNE - National Grid, Warwick; United Kingdom
C.10.2 A new backfill material with an extremely high thermal conductivity
Heinrich BRAKELMANN, Joerg STAMMEN - University Duisburg-Essen, Duisburg;
Germany
Joerg DIETRICH - HeidelbergCement Geotechnik, Ennigerloh; Germany Raymund BÖING - Heidelberg Beton, Heidelberg; Germany Hans-Peter MAY - nkt cables GmbH, Köln; Germany
C.10.3 Backfill replacement saves underground transmission lines cost and postpones
investments Geraldo de ALMEIDA, Luis ZANETTA - University of Sao Paolo - USP, Sao Paolo; Brazil Athayde MACEDO, Carla DAMASCENO - Ligth SESA, Rio de Janeiro; Brazil
C.10.4 Improved cooling of high voltage cables
Herbert NYFFENEGGER, Detlef WALD - Brugg Kabel AG, Brugg; Switzerland Harry ORTON - Orton International Consulting, Vancouver, BC; Canada
C.10.5 Hybrid high capacity transmission circuits - Challenges for cables in series with EHV
overhead lines Glenn STAPLETON - Powerlink Queensland, Virginia, Queensland; Australia Simon LLOYD - Cable Consulting International, Kent, WA; United Kingdom
SESSION A.11
Closing Session
Wednesday June 22nd, 2011 - 16:30 - 18:00 Room A

Page 31
Page 31 of 31 Jicable��11 – International Conference on Insulated Power Cables – Paris-Versailles June 19-23, 2011 The closing session will present two parts: - Round table : State of the art and future prospects of HVDC links by power insulated
cables.
- Jicable��11 Award and closing of the conference.
Search more related documents:Jicable��11 Programme of the Conference

Set Home | Add to Favorites

All Rights Reserved Powered by Free Document Search and Download

Copyright © 2011
This site does not host pdf,doc,ppt,xls,rtf,txt files all document are the property of their respective owners. complaint#nuokui.com
TOP